(305) 374-8300
MC Harry & Associates – Opa-Locka City Hall IAQ Services
October 13, 2015

EE&G assessment for the presence of water damage and mold impacted materials in the Opa-Locka City Hall listed on the National Register of Historic Places. The historic building was built in 1926 and was constructed primarily of concrete block and steel; with drywall system and plaster, ceilings with vinyl, wood or ceramic tile floors. A visual assessment was performed on the first and second floors of the commercial offices and warehouse building and a visual assessment of the HVAC systems was performed. The purpose of the inspection was to identify water-damaged or assumed mold growth AMG-impacted building materials.

MC Harry & Associates MC Harry Associates offers a full range of architecture and engineering services with a portfolio of diverse project experience. Since 1957, we have an extensive track record of on-time, on-budget completion of projects with impeccable service levels to our clients.
. MC Harry Associates is honored to be the recipient of numerous design awards for innovative solutions for functional buildings. Our firm’s principals and key personnel have extensive experience providing a broad range of design and consulting services to public and private sector clients.

Opa-locka is a city located in Miami-Dade County, Florida, United States. As of the 2010 U.S. Census, the population was 15,219. The city was developed by Glenn Curtiss. Developed based on a One Thousand and One Nights theme, Opa-locka has the largest collection of Moorish Revival architecture in the Western hemisphere, and streets with such names as Sabur Lane, Sultan Avenue, Ali Baba Avenue, Perviz Avenue, and Sesame Street. Opa-locka has an area of 4.2 square miles (11 km2) and is located in the northeastern area of Miami-Dade County, Florida.

IAQ Services

Relative humidity, temperature, and dewpoint readings were collected using a Protimeter Moisture Measurement System MMS manufactured by GE Protimeter. A thin film capacitive sensor was used for RH measurement; results were reported in percent %. A Thermistor sensor was used for temperature measurement; results were reported in degrees Fahrenheit °F. Dewpoint measurements were calculated by the device based on the current temperature and relative humidity readings; results were reported in degrees Fahrenheit °F.