Mold can be a serious problem for residential buildings, especially if it goes undetected. It easily spreads and grows everywhere. Your carpets, food, clothing, drywall and even the insides of walls are not safe from this menace. You can also find mold growing above ceiling tiles and condensing or leaking pipes. In short, it can grow anywhere and everywhere.
Removal of mold can be a costly affair. Therefore, it is best to do all we can to prevent mold growth in our residential properties. By preventing it from growing and expanding before it becomes a serious problem, we can nip the problem in the bud and save on costs. Here are some tips that can help prevent mold growth in your property and save you from costly repairs.
1. Tackle Repairs and Wet Areas Right Away
The main cause of mold growth is excessive moisture. You can control and prevent mold growth if you keep your indoor moisture in check. Here are some ways to do it:
- Fix leaks and other plumbing issues as soon as you find out about them.
- Dry all damp and wet spots in the house within a couple of days.
- Clean your roof gutters regularly. It is one of the most common reasons for mold growth and goes unchecked until a lot of damage has already been done.
2. Use Mold-Resistant Products
If you have faced the issue of mold growth in your residential property before, then it is best to take preventive measures to avoid facing the issue again. There are various moisture-resistant products that you can use.
- To reduce moisture indoors, place the appliances that generate moisture, such as dryers, outdoors whenever it is possible.
- There are different mold-resistant products that you can use. These include mold-resistant sheetrock, mold inhibitors for paint, and mold-resistant drywall.
- Keep an eye on your plants and check them regularly for mold. Add Taheebo tea to the plants while you water them to prevent mold growth in the soil.
3. Monitor and Regularly Maintain Your HVAC Systems
Poorly maintained HVAC systems are another common reason for mold growth in residential and commercial buildings. This creates too much moisture indoors which leads to mold. Thus, it is important to keep your HVAC units well-maintained to prevent mold growth.
- Make sure that the drip pans of the HVAC unit are unobstructed, flowing properly, and are clean.
- The indoor humidity level should be maintained between 30% and 50% RH.
- Check for signs of excess humidity and moisture. These include condensation on walls, pipes, and windows.
- Keep your indoors well-ventilated. Open the windows and doors if the air outside is dry and cold. If the outside air is humid and warm, it is best to use a dehumidifier to keep moisture levels in check.
These were some simple yet effective tips that can help prevent the growth of mold in residential properties. Remember, prevention is much better than costly repairs. If you notice any signs of mold growth in your house, call the mold removal experts at EE&G right away at (305) 374-8300. As the leading mold removal service in Florida, we can help solve all of your problems in no time.