Emergency Service 24/7

Fire - Water - Mold Damage - Cleanup & Restoration

Call 866-334-9111

Tampa (813) 379-9833

Miami (305) 374-8300

Melbourne (321) 255-0160

Archives

by Olga Loreto Olga Loreto No Comments

Mold vs. Mildew: Appearance, Types, and Effects

Two of the most common types of fungi that are commonly found growing in most homes are ‘mold’ and ‘mildew.’

While the two may appear to be extremely similar, they are actually quite different from each other in terms of many factors, such as their types, textures, effects, and growth, to name a few. Mildew is, after all, a kind of mold, so they will obviously have many similarities and some minor differences between each other. To help you distinguish mold from mildew, here are a few common differences between the two types of fungi.

Appearance

The easiest and the most basic way to differentiate between two organisms is their appearance. Generally, mold has a green or black colored appearance while mildew adopts a more whitish or grayish look.

Mold

This type of fungus has a slimy and fuzzy appearance, and it often grows in irregularly shaped spots that are typically scattered across a surface. They can also grow in different colors such as brown, gray, yellow, green, or blue.

Mildew

On the other hand, mildew appears more powdery and fluffier and tends to grow in a flat pattern. You can easily identify mildew due to its patches of yellow, white, and gray that appears in moist areas. However, over time, mildew can eventually transform into a deep brown or black color.

Types

Another factor that distinguishes mold from mildew is the numerous types of each fungus that are most commonly found growing in homes and other places.

Mold

There are as many as 10,000 species of mold that can live indoors; however, there are majorly five types that fall under the category of ‘household molds.’

These are:

  • Alternaria – commonly grows around windows, in showers, and on the walls.
  • Stachybotrys chartarum (black mold) – found inside air conditioning ducts and around leaky pipes.
  • Pencillium – grows on moist areas, mattresses, carpets, wallpapers, and insulation.
  • Aspergillus – grows on clothing, walls, paper-based products, and insulation.
  • Cladosporium – typically appears on floorboards, carpets, curtains, and other wooden surfaces and fabrics.

Mildew

There are also many different species of mildew; however, two of them are the most common types.

These are:

  • Downy Mildew – typically grows on agricultural products like crops and vegetables.
  • Powdery Mildew – this type mainly affects flowering plants and grows in patterned splotches.

Effects

Both mold and mildew produce different kinds of effects that require immediate action and care.

Mold

Mold is known to cause a number of health problems for anyone who comes into contact with mold spores. It also leads to serious structural damages and can affect the walls, carpets, flooring and numerous other objects and spaces inside your home. Some of its most serious health risks involve allergic reactions, respiratory problems, fatigue, painful and aching joints, and heart problems.

Mildew

Although mildew is known to affect plants and crops, it can also easily grow inside your home and other indoor spaces. If you end up inhaling mildew spores, it can lead to numerous respiratory problems such as severe coughing, sore throat, difficulty in breathing, and headaches.

Bottom Line

Both mold and mildew have the potential to be extremely dangerous, so it is essential to take immediate measures to prevent them from causing any kind of damage.

by Olga Loreto Olga Loreto No Comments

The Major Differences between Mold and Fungus

Mold and fungus are two of the biggest concerns of most homeowners because these two substances can cause a plethora of problems once they target different areas of your home. These two are quite similar to each other, and many people tend to use the terms interchangeably oftentimes. Even though mold and fungus are closely related, it is essential to know that they are actually different in terms of their nature, characteristics, appearance, benefits, and harmful effects.

What is Mold?

It is a specific kind of fungus that is invisible to the naked eye. However, when mold spores grow together in abundance, they do become visible, and they also emit a certain kind of a weird smell. Mold is microscopic in nature and is highly characterized by multicellular filaments that are known as ‘hyphae.’

What is Fungus?

This is a heterotrophic organism that is present in the air and exists all around us. The fungus is a living organism that is aerobic and is classified by its own separate kingdom. Some common types of fungi include yeasts and mushrooms.

Difference between Mold and Fungus

Although mold is a common type of fungus, they both are quite different from each other. Take a look at a few basic differences between the two organisms.

Types

The mold consists of more than 100,000 types of species that are generally broken down into three main categories: allergenic (can cause mild allergies), toxigenic (toxic to contact and touch), and pathogenic (infectious for those with weak immune systems).

Fungus, on the other hand, has over 200,000 species. A particular type of fungus has the ability to transform into numerous different species. Not just that, but a single type can adopt a variety of characteristics from other fungi.

Morphology

Mold is characterized as a multicellular microscopic fungus that features a group of hyphae filaments. When these filaments join together, they form the mycelium, which is visible to the naked eye.

The fungus has the ability to exist as three different organisms: macroscopic mushroom with a fruiting body, unicellular organisms as yeast, and multicellular molds with a network of hyphae.

Growth

Mold starts growing as a single spore, which is called a ‘mold spore.’ Once it begins to draw in moisture from the air, it quickly starts growing in size and creates a thin thread. The ideal breeding conditions for mold are dark, damp, and moist places.

by Olga Loreto Olga Loreto No Comments

Ways to Prevent Pipes from Bursting In Your Home

The season is absolutely beautiful; it brings with it an opportunity to drink hot coffee, wear warm clothes, sit by the crackling firewood, and sleep under cozy blankets. However, it also brings with it one of the biggest nuisances that stress out most homeowners – frozen and burst pipes.

This has to be one of the biggest and most chaotic plumbing problems in most homes during these months. There are many factors that can cause pipes in your home to freeze and burst, such as extreme pressure of water, old and rotten pipes, regular wear and tear, and cold temperatures, to name a few. To make things worse, among the numerous preparations for the season, many homeowners tend to overlook taking effective measures to keep their pipes from bursting. So, what can and what should you do to prevent burst, frozen pipes in your home during the next season? Take a look at some useful preventive tips and measures to protect the pipes from causing serious water damage in your home.

Proper Insulation

One of the most common reasons why pipes tend to freeze during this season is because they are quite exposed to the cold, which makes them super prone to freezing. You can prevent that from happening by making sure that the pipes are well-insulated and protected. One way of doing that is using foam insulation that you can easily get from any home improvement center near you. As the name implies, the foam features great insulation properties that help keep the pipes insulated. All you need to do is wrap the foam around the pipes properly for as long as the months last in your region.

Seal All Cracks and Leaks

During the season, cold air tends to accumulate inside the pipes through cracks and leaks, which eventually cause them to freeze and burst. You want to make sure to seal up all potential and obvious cracks and leaks to keep out as much cold air as you possibly can.

A super simple and effective solution for that is caulking. Caulk is a material that is commonly used for sealing open seams and joints in a variety of structures, most common of which are pipes. Caulking does a great job of keeping out the chill and protecting the pipes for a long period of time.

Movement of Heat and Warm Air

A majority of homeowners keep their homes tightly packed by keeping all windows and doors closed at all times. Among numerous other problems, this prevents the proper movement of heat and warm air throughout the interior of your home. This, in turn, doesn’t allow any warm air or heat to reach the pipes in your bathroom or kitchen, for instance, thereby increasing the risk of them freezing. So, make sure to direct warm air towards the pipes by keeping the interior doors open for the most part of the day.

Bottom Line

Always check your pipes for possible leaks and cracks, regardless of the season. Follow the above-mentioned tips for proper protection of your pipes to prevent water damage. In case you do meet an unforeseen pipe bursting or freezing situation, you should immediately call any water damage restoration service near you for effective and quick water removal.

by Olga Loreto Olga Loreto No Comments

COVID-19 DISINFECTION AND DECONTAMINATION SERVICES

EE&G is an environmental contracting and restoration firm with immediate response capabilities throughout the SE United States. EE&G is a National Expert in large scale Disinfection and Decontamination of microbial pathogens. EE&G has the staff and resources to respond immediately to your properties, sanitize and disinfect, so re-occupancy can occur quickly.

EE&G is a premier emergency and disaster response firm.

How COVID-19 Coronavirus Spreads

Person-to-person spread
The virus is thought to spread mainly from person-to-person. Between people who are in close contact with one another (within about 6 feet). Respiratory droplets produced when an infected person coughs or sneezes. These droplets can land in the mouths or noses of people who are nearby or possibly be inhaled into the lungs.

Can someone spread the virus without being sick?
People are thought to be most contagious when they are most symptomatic (the sickest). Some spread might be possible before people show symptoms; there have been reports of this occurring with this new coronavirus.

Spread from Contact with Contaminated Surfaces or Objects
It may be possible that a person can get COVID-19 by touching a surface or object that has the virus on it and then touching their own mouth, nose, or possibly their eyes. A major challenge is the virus may be viable on surfaces up to 9 days after leaving its host!

DISINFECTION IS CRITICAL!

It is IMPORTANT that potentially affected areas be disinfected before re-occupancy to minimize exposure! We will do the “dirty” work to get you back in business!

Why EE&G?

Emergency Response and Decontamination:

EE&G has performed hundreds of projects nationally involving pathogenic disinfection:

Recently, EE&G sanitized an office building, a daycare, and a school where a COVID-19 Virus impact occurred.
Sanitized a multi-story office building, a military barracks, and a jail impacted from an MRSA outbreak.
Sanitized and micro-cleaned multiple evacuation shelters and school buildings for infectious disease patients for the Red Cross following Hurricanes Michael, Irma, and Dorian.
Managed the collection and proper disposal of deceased and pathogen-ridden livestock from flooding Hurricane Floyd for the USACE.
Sanitized and micro-cleaned hospital sites for black-water spills and sewage backups.
Sanitized poultry facilities following the Avian Flu outbreak at poultry farms and processing facilities.
Sanitized rooms in Assisted Living Facilities after the death of the tenant or infectious disease outbreak.

EE&G HVAC DECONTAMINATION:
EE&G is a licensed Mechanical Contractor in Florida and Georgia and has a trained team designated to cleaning and sanitizing air conveyance systems to include air handlers, ductwork and all air conveyance system components. EE&G uses State-of-the-Art equipment, work practices and a licensed, certified, and thoroughly trained workforce to clean and sanitize air conveyance systems.

  • LICENSES / CERTIFICATIONS
  • CERTIFIED IICRC
  • CERTIFIED GENERAL CONTRACTOR
  • CERTIFIED MECHANICAL CONTRACTOR
  • CERTIFIED BUILDING OPERATION &
  • PERFORMANCE MANAGEMENT
  • PROFESSIONAL ENGINEER
  • MOLD REMEDIATOR LICENSE
  • ASBESTOS ABATEMENT CONTRACTOR
  • EPA LEAD-BASED PAINT

FOR IMMEDIATE RESPONSE CONTACT:
911@eegrestore.com
Jay Kherani, (678) 938-0818, Jkherani@eegrestore.com
David Buono, (321) 615-4986, Dbuono@eegrestore.com
COVID-19 DISINFECTION
ATLANTA – MELBOURNE – MIAMI – TAMPA

Top